Frequently asked questions
Plain answers to what buyers ask us most. If yours is missing, ask us.
Buying and setup
Who is glidebot?
glidebot is an authorised Keenon provider for Australia. We sell, set up and service the Butlerbot W3, the KLEENBOT C30 and the KLEENBOT C40. Keenon Robotics makes them.
How much do the robots cost?
It depends on the robot, the building and whether you buy or rent. We work it out per building. Ask us and we will go through the options.
Can we try a robot before we commit?
Ask us what a trial would look like for your building. Terms are set per site.
What happens at a site survey?
We look at Wi-Fi, floors, doors, ramps, charging spots and lifts, and tell you what the robot needs and whether it is a good fit.
Do we need to buy a servicing contract?
Servicing arrangements are agreed per building. Ask us what is on offer for yours.
How long does it take to get a robot working?
It depends on the building, especially the lifts. We give you a realistic timeline after the survey.
Who needs to be involved on our side?
Usually the person who runs the building, the people who will use the robot every day, your IT contact and, for lifts, your lift contractor.
Do you sell other Keenon robots?
We carry three: the Butlerbot W3, the KLEENBOT C30 and the KLEENBOT C40. We would rather support three well than sell a long catalogue.
The robots
What does the Butlerbot W3 do?
It carries items in enclosed compartments to rooms or wards and returns to base. It is Keenon's delivery robot for hotels and similar buildings.
What is the difference between the KLEENBOT C30 and C40?
Both clean floors. The C30 is a lighter dry cleaner that sweeps, vacuums and dust mops. The C40 also scrubs with water. Each robot page has Keenon's published specifications.
Can a robot go up stairs?
No. Robots work on one level and move between floors by lift, if the lift is integrated.
Do cleaning robots replace a cleaner?
No. They clean open floor areas. Bins, edges, benches and detail work still need a person.
Do the robots disinfect?
No. The cleaning robots sweep, vacuum or scrub floors. They do not disinfect.
How long does a robot run on one charge?
It depends on the model and the job. Keenon lists up to 12 hours for the W3, up to 6 hours sweeping and vacuuming for the C30, and up to 5 hours scrubbing for the C40.
Does a robot need someone to supervise it?
Not constantly, but staff load, empty and charge it. Someone on site should know how to pause it and who to call.
Buildings and lifts
Does the robot need Wi-Fi?
Yes. Robots rely on a network in the places they work, including in lift cars if they ride them. We check coverage at the survey.
Can the robot use my lifts?
Only if the lift is integrated with the robot. This needs your lift maintenance contractor's agreement. We check before you sign.
What if my lifts are old?
Older lift controllers may need extra hardware, and that is outside the robot itself. We find this out at the survey so you know before deciding.
Will it work on carpet?
It depends on the robot and the pile. The cleaning robot pages show Keenon's published figures. We recommend trying it on your actual carpet.
Where do we charge it?
Each robot needs a dock or charging spot on its floor. We agree the location at the survey.
How narrow a corridor can a robot use?
Keenon lists a minimum passage width of 70cm for the W3 and 650 mm for the C40. We measure your doors and corridors at the survey.
Can robots pass automatic doors?
Keenon lists a robot access control module among its accessories. How it works with your doors is confirmed at the survey.
Support
Who do we call if something goes wrong?
Us. glidebot is your contact for questions, faults and adjustments. Keenon is behind us.
Is training included?
We train the people who will use the robot. We suggest training several staff, not one.
Do you support sites outside your home region?
Yes, supply and support are Australia-wide. The Australia page explains how a remote site works.
What if the robot cannot do what we hoped?
Tell us early. We would rather adjust routes or schedules, or say plainly that it is not the right fit, than leave it unused.
Who fixes it if it breaks?
Report it to us and we work out what is needed. How repairs and replacements are handled is set per site.
What happens when the software changes?
Keenon does not publish its update process on the product pages. We confirm how updates are handled and tell you about changes that affect how you use the robot.
Safety and compliance
Do robots need a safety assessment?
There is no robot-specific work health and safety code in Australia. Mobile robots are treated as plant, so the building operator and supplier both carry duties. We help with the information your safety team asks for.
Is the equipment certified for Australia?
We confirm the electrical safety and certification details with Keenon and can share them on request. We make no claim until we hold them.
What about cameras and privacy?
Robots use sensors to navigate in guest, resident or patient areas. We explain what is captured and where it goes, and help you update your own privacy notices.
What do robots do in a fire alarm?
Keenon does not publish this on its product pages. We confirm the behaviour and agree it with your fire safety team before installation.
Are the batteries a fire risk?
Charge points should be planned like any other lithium battery equipment. Check with your insurer, and we will give you the information they need.
Where should robots never go?
Places your safety, clinical or infection control teams rule out, such as theatres, bedrooms and bathrooms. We map only the areas that suit.
See one on your floors
Tell us about your building and we will book a demo with a Keenon robot.